Your safety comes first — read before you go. Taf4All only lists job offers published by third parties. We are not the employer, we do not conduct these recruitments, and we cannot guarantee what happens once you make contact — you deal directly with the person or company behind the offer, at your own risk.
Automatically translated from French. View the original offer
Electrical QC Inspector (Electrical Quality Inspector)
Industry: Industry / Energy / Construction.
Place of duty: to be specified. Type of contract: to be specified. Hierarchical connection: Quality Manager / QA/QC Manager.
Job overview
As part of its electrical equipment construction, installation and commissioning activities, the company is looking for an Electrical QC Inspector to monitor the compliance of electrical installations with plans, technical specifications, applicable standards and contractual requirements. It ensures the quality of execution of electrical works, identifies non-conformities and ensures the implementation of necessary corrective actions before the acceptance of the work.
Main duties
Inspection and quality control of electrical installations
Inspect electrical installation work in accordance with approved plans, technical specifications and control procedures. Check the conformity of the installation of cables, cable trays, ducts, electrical cabinets, distribution boards and associated equipment. Control electrical connection, wiring, grounding and equipotential bonding work. Check the identification and location of cables, terminal blocks, circuits and electrical equipment. Ensure that quality requirements are met at every stage of the work, from installation to testing. Control the quality of electrical materials and equipment received on site.
Technical inspections, tests and verifications
Participate in electrical inspections and testing in accordance with approved procedures. Check the electrical continuity, insulation resistance and grounding tests according to applicable requirements. Monitor test results and verify compliance with acceptance criteria. Assist with pre-powering inspections and commissioning of facilities. Check the availability and validity of calibration of measuring instruments used for controls.
Management of non-compliance
Identify, document and report defects and non-conformities found during inspections. Issue non-compliance reports (NCRs) – Non-Compliance Reports), according to current procedures. Ensure follow-up of corrective actions until the identified deviations are resolved. Carry out counter-inspections after correction of anomalies. Ensure traceability of controls and closure of inspection points.
Documentation and quality reporting
Prepare and complete inspection sheets and quality control reports. Verify compliance of the work with approved implementation plans, procedures and technical documents. Participate in the preparation and updating of inspection and testing plans (ITPs) – Inspection and Test Plans). Track stop points (Hold Points) and meeting points (Witness Points), in accordance with ITP. Contribute to the creation of the final quality file, including inspection reports, test results and compliance documents.
Compliance with HSE rules
Ensure compliance with health, safety and environmental regulations during inspections. Ensure that controls are carried out under appropriate safety conditions. Report any dangerous situation or anomaly that could compromise the safety of people and facilities. Comply with electrical logging procedures and risk prevention rules related to electrical work.
Candidate profile
Education / Qualifications
Bac+2 to Bac+3 in electrical engineering, electrotechnical, electromechanical or equivalent field. Additional training in quality control, electrical inspection or quality assurance is an asset.
Experience
Minimum of 3 to 5 years of experience in quality control or inspection of electrical work in industrial, field or energy sectors. Experience in industrial construction projects, electrical installations, power plants or technical infrastructure would be appreciated. Experience in oil, gas or mining projects is an advantage.
Technical skills
Good control of industrial electrical installations and their components. Ability to read and interpret electrical drawings, single-wire diagrams, wiring diagrams and layout plans. Good knowledge of inspection procedures, control methods and electrical testing. Knowledge of electrical standards applicable to the project, including IEC, IEEE or NFPA 70 (NEC), according to contractual requirements. Mastery of electrical measurement tools and understanding of test acceptance criteria. Knowledge of inspection and test plans (ITPs), control sheets, and non-compliance reports. Mastery of office tools for writing reports and document monitoring.
Soft skills
Rigor and sense of detail. Analytical mind and ability to detect anomalies. Organization and compliance with procedures. Ability to work as a team with engineering, construction and quality teams. Good communication and reporting skills.
Responsibilities
Autonomy, responsiveness and sense of responsibility.
Performance Indicators (KPI)
Compliance rate of electrical installations inspected. Number of non-conformities detected and resolution time. Closing rates for non-conformities within the time limits. Compliance with inspection program and inspection and testing plans. Success rate of inspections and tests during recovery checks. Quality, reliability and completeness of quality documentation.
Functional relationships
The incumbent works closely with the Quality Manager/QA/QC Manager, electrical engineers and supervisors, construction and installation teams, commissioning teams, as well as customer representatives and inspection bodies where applicable.
Special conditions of practice
Position based on an industrial site or a construction site. Regular presence in the field for inspections and technical checks. Strict compliance with HSE rules and electrical safety procedures. Availability to work according to the schedule and operational constraints of the project.
Expected result
Ensure compliance of electrical installations with the technical, normative and contractual requirements of the project, while ensuring the traceability of inspections, the resolution of non-conformities and the delivery of installations that meet the required quality criteria.
---
[Click the Apply button below to apply, and Create my CV to build a CV tailored to this offer, professionally]
You are recruiting?
Find candidates on TAF4ALLStand out with a professional CV and a personalized cover letter generated by AI in 3 minutes.
Real offers from Canadian employers who are explicitly looking for candidates outside Canada. No agency, no fees — you apply yourself.
Bonjour l'entreprise recrutante, je suis candidat pour ce poste. Mon parcours en Afrique m’a permis de maîtriser les compétences demandées dans l'annonce dans des contextes complexes. Je serais ravi d’échanger sur ma capacité à apporter des solutions adaptées à vos enjeux. Merci pour votre considération.
Positionnement — Votre lettre de motivation doit répondre à une seule question : pourquoi VOUS pour CE poste précis à CE moment ? Évitez les lettres génériques — une phrase sur ce que vous apportez spécifiquement vaut mieux que trois paragraphes généraux.
Candidature ciblée — Adaptez votre CV aux mots-clés exacts de cette offre et prouvez chaque compétence par un exemple concret. Une lettre de motivation qui montre que vous comprenez les défis spécifiques de ce poste fait systématiquement la différence.
🎯 Make your application ATS-ready
ATS (Applicant Tracking Systems) are the software recruiters use to automatically filter CVs before any human reads them. Our CV builder is specifically designed to pass these filters — and it takes under 3 minutes.
Create my ATS CV →Taf4All only lists job offers published by third parties. We are not the employer, we do not conduct these recruitments, and we cannot guarantee what happens once you make contact — you deal directly with the person or company behind the offer, at your own risk.
CETUD recrute : Ingénieur en Mobilité Électrique – Projet STMES. Le CETUD lance un appel à candidature pour un(e) Ingénieur(e) en Mobilité Électrique, dans le cadre de la mise en œuvre du projet STMES, financé par le FEM (8e cycle) en partenariat avec le PNUE. Au sein de l’équipe STMES, vous assurerez le suivi des étud
🧠 Profil recherché Dans le cadre d’une mission de recrutement pour l’un de nos clients, nous recrutons plusieurs profils pour la construction d’un dépôt de stockage. Profil recherché 💼 Expérience Au moins 5 ans d’expérience en contrôle qualité E I. Connaissances de base en matière de tests et de documentation E I. Ca
📋 Missions principales Effectuer l’inspection qualité (QC) des installations mécaniques pour vérifier la conformité aux spécifications, aux ITP et aux codes applicables. Inspecter l’installation des équipements, l’alignement, le scellement (grouting) et le boulonnage. Assister aux essais et contrôles selon les besoins
🧠 Profil recherché 💼 Expérience Au moins 5 ans d’expérience en contrôle qualité mécanique. Maîtrise des procédures ITP, NCR et de la gestion des listes de rectifications. La maîtrise de l’anglais est un atout